How to Verify Basic Functioning for Netgear router devices

After you turn on power to router follow sequence of events should occur:

1)      When power is first applied to verify 192.168.1 Netgear router setup that power light is on.

2)      Verify that power lights turntable within a few seconds indicating that self-test procedure is running.

3)      After approximately 30 seconds verify that:

·         The colour of power light changes to green.

·         The LAN port lights are lit for any local ports are connected.

·         The internet port is linked and its light is lit.

NPower light Not On:

If power and other lights are off check following

1)      Make sure that power cord is properly connected to the router and that power supply adapter is properly connected to a functioning power outlet.

2)      Check that you using power adapter supplied by Netgear for this product. Go for the steps that can help you in configuring the MAC spoofing. 

Power Light stays amber:

When the router is turned on power light turn amber for 30seconds and then turns green if the light does not the green router has a problem, if power light off and back on one minute after power up.

1)      Turn power off and back on to see of router recovers.

2)      Clear the router configuration to factory defaults, this will set router IP address to 192.168.1.1.

Internet port lights not ON:

If either internet lights do not light when the 192.168.1 Netgear router setup ethernet connection is made check the following:

1)      Make sure that ethernet cable connection is secure at the router and a PC.

2)      Make sure that power is turned on the connected PC.

3)      Be sure you are using ethernet cables like the cable that was supplied with a wireless router.

Troubleshooting the Internet Service Connection for Netgear device

If the router is unable to access the internet check that internet connection is working and then check that wireless router can get an internet address.

Internet connection: first verify that cable or ADSL modem has log into Netgear router successful connection the cable or ADSL modem status light indicates if the modem connection is successful or not check mode documentation or call your internet service provider for help with verifying the modem has the successful connection. Get the right way for recovering the lost internet connection 

Wireless router internet light is green:

If your internet light is green or blinking green then you have a good internet connection and your wiring is correct.

Wireless router internet light off:

If the internet is off verifying that the ethernet cable is securely connected between the cable or ADSL modem and both modem wireless router are turned on.

Obtaining an internet IP address:

·         Log in to the wireless router.

·         Use router status link under maintenance heading to check log into Netgear router that IP address is shown for internet port, if your router is unable to obtain an IP address from the service provider the problem may be one of following:

·         Your service provider may require a login ask service provider whether they require PPP over ethernet login.

·         You may have incorrectly set the service name, username, and password.

·         Your service provider may check for your PC hostname, assign the PC hostname of ISP account to a wireless router in the browser-based basic setting menu.

·         Your service provider only allows one Ethernet MAC address to connect to the internet and may check for PC MAC address, in this case, inform the service provider that you have bought a new network device and ask them to use the wireless router MAC address

LINKSYS WI-FI EXTENDER BLINKING GREEN

The Linksys Smart Wi-Fi is a free setting bundled with the Linksys Smart Wi-Fi Extenders.  After installing up your Linksys Smart Wi-Fi Router, you can access it anywhere there is an internet connection by adopting a Linksys cloud account and associating your router to it.

Choosing the best Wi-Fi extenders for your house or business position can be a difficult decision for you. If you are involved with the multiple options, then you should go for the Linksys extender setup re6400. You will be served with the advanced technology of 802.11ac.

Some technical specifications for Linksys extender setup re6400

·        Dual-band concurrent

·        Cross-Band technology

·        Support Wi-Fi range up to 7,500 sq ft

·        Wireless Security

·        External non-detachable antennas

·        One 10/100/1000 Gigabit Ethernet port

Setup:

Linksys extender setup re6400

1.     Locate the wireless interface from your device and the name will be the Linksys Extender Setup.

2.     Begin the web browser and choose the local address HTTP //extender.linksys.com and sign in into smart Linksys Wi-Fi sign in option.

3.     Click on the start menu. You will select the wireless network.

4.     You will find the Spot Page; this page will give you the information concerning the range of the signal. This signal will show you the best spot where you should place your extender.

5.     Fill the password and tap on the Next option.

6.     You will be required for the configurations.

7.     Create the admin password and also select the security question. Get the procedure here from which you can manage the guest account for your Linksys wifi router.

Sign in:

Follow the steps for smart Linksys Wi-Fi sign in, and how to access your router locally:

1.     Launch a web browser.

2.     Insert your router's default IP address, "192.168.1.1", or press "myrouter.local" in the Address bar then click Enter.

3.     If the IP address does not work or if it has been modified, check your Linksys router's IP address.

4.     If you confront a terrible gateway error upon trying to access your router, click here for troubleshooting instructions.

5.     Open your Router Password then click Log in. The default password is an admin. If you have modified it, enter the current password instead.

When the Linksys Smart Wi-Fi Sign In page appears, enter your Email Address, and Password then clicks login.

My wifi extender won't connect to the internet

NETGEAR WiFi range extenders enable you to keep mobile devices, media players, and PCs connected to WiFi with a secure connection and expanded coverage in every corner of your home. Newbies may face issues while performing their Netgear wifi extender setup, like their extenders are not connecting to the internet, etc. So we’ll help you with the same. Learn the procedure here for setting up of the wifi range extender through the WPS button.

Following may be the reasons for your extender not connecting to the internet:

ü  Configuration of your router to the extender might have been done correctly.

ü  You could not install your Netgear Extender successfully, or you are unable to setup it.

ü  You’ve lost your internet connection, and that’s why your extender is blinking orange.

The very first step to overcome this is to reset your extender.

Follow these steps to Reset your Extender:

l  Plug your Netgear WiFi range extender to the wall socket and remove all the cables attached to it.

l  Push and hold the reset key which is at the back for 20 seconds.

l  Release the button and wait for your extender to restart.

Now Once You Reset Your Netgear range extender, it’s Time to complete Netgear Wifi Extender setup.

Netgear WiFi Extender Setup –

Follow the Given Steps to install and configure Your Range extender

1.        Plug in your Netgear Wi-fi Range Extender to a power socket and ensure that it not very far or within the range of your router.

2.        Open any web browser in any of the connecting devices like PC or handset.

3.        Go to the official site by typing www.mywifiext.net on the address bar and then press Enter.

4.        Once You logged into Your Web-based extender console, follow the Onscreen instructions to Setup Netgear extender with your existing Wireless Router.

Hope that now your problem is resolved. If not, do visit http www.my-mywifiext.net to know more about it.